|
|
Wireless dataexchange for heat exchanger
Wojnar, Petr ; Hynčica, Ondřej (referee) ; Štohl, Radek (advisor)
The subject of this bachelor’s thesis is firstly an introduction to devices that are used for controlling the heat exchanger model, visualization and wireless data-exchange. For this purpose are used ROCKWELL AUTOMATION programmable logic controllers, ROCKWELL AUTOMATION terminal and SATEL radio modems. A schematic of the heat exchanger model is also included with description of each model part. The second part of this document is focused on the design of regulation, visualization and wireless data-exchange by means of already mentioned devices. The last part describes realization steps of controlling, creating of visualization and algorithm for wireless data transfer according to designs mentioned in the second part of this document.
|
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Burešová, Karolína ; Lekeš, Architekt MSc Vojtěch (referee) ; Foretník, Jan (advisor)
The assignment is to elaborate the architectural design of the new transfer terminal in Dvůr Králové. The terminal has to associate current bus lines and a new train line using the current siding. In the proposal I was primarily concerned with connecting the Terminal to the city with respect to the development area of the city. The shape of the building is based on urban planning. The building continues in the rails and turns into a street line. This creates a scattering surface towards the ground floor of Christmas decorations. The conveyor solution enables the pedestrians to move freely through the platform without crossing the means of transport, facilitating movements of the body and the visually impaired. The stops are located in the immediate vicinity and a direct bus-train-public transport will be created. The aim of the project is to design a node of all movements - pedestrians, cyclists, trains and buses. The proposal builds on all important directions and considers the creation of a city ring from the terminal, the city center and the zoo.
|
|
| |
|
|
ZigBee implementation for Automotive Industry
Zatloukal, Martin ; Maršálek, Roman (referee) ; Prokopec, Jan (advisor)
This bachelor’s thesis describes possibilities of usage of ZigBee communication protocol in automotive industry, transport and logistics. Thesis also deals with ways of practical implementation of ZigBee protocol including typical cases solutions, designing and realization of necessary electrotechnical devices and modules followed by compilation of control software and experimental measurements of these devices in real traffic flow. In the first part of thesis, there are some basic features and parameters of ZigBee reminded, followed by ways of ZigBee communicator usage description and adumbrating how to perform integration with existing practical systems. The second part is about analysis of ZigBee data system construction, communication system scheme design and pre-projection of block schemes of its particular cells. The third part concretizes requested functions and features of these cells and describes ways of its hardware realization. The fourth section describes controlling software design, connection and controll of functions using PC and additional programs, using of X-CTU software offered by MaxStream Company to set up XBee parameters and using of AVR Studio 4 offered by Atmel Company to set up ATmega16 processor. The last part is taken by completation of hardware and software, tests with a few of XBee chips and network nodes in laboratory conditions and examples from the real traffic range measurement.
|
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Machainová, Eva ; Dýr, Petr (referee) ; Žalmanová, Petra (advisor)
The thesis deals with the design of the transfer terminal in Dvůr Králové nad Labem. The territory for the new terminal is located between the industrial and residential areas. The concept of a proposal is to create a securely accessible place for pedestrians and cyclists, given the fact that locals are most often transported by bicycle or on foot. At the same time, I try to create a pleasant and easy-to-understand place, which will provide new visitors with a place to get the necessary information and for permanent passengers a place they will feel safe and will use the terminal. The secured access to the terminal becomes by a diversion of a part of the transport so that a pleasant park can be created on the eastern part of the land towards the city, which will support the relationship of the area to the city thanks to the better pedestrian and bicycle accessibility of the terminal. The park will be separated from the road by trees and inside the park there will be only low shrubs to make the park clear and there are no unpleasant looking corners. At the same time, it will be the first experience for arriving visitors to the city after leaving the terminal.
|
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Šlesingerová, Veronika ; Hora, Jan (referee) ; Ponešová, Barbora (advisor)
The subject of this architectural and urban study is to design a new transfer terminal in Dvůr Králové nad Labem. The terminal has to associate the existing bus lines and the new train line using the existing track, which connects to the train station located on the outskirts of the city. At the same time, the town deals with the issue of train and bus services. It came with a proposal to extend the track closer to the city and at the same time move the existing bus station to one place. This creates a direct train-bus transfer. The aim of the project, however, is to design not only the transport terminal, but to create a new public space with the use of the city itself.
|
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Černá, Tereza ; Sedláček, Jan (referee) ; Ponešová, Barbora (advisor)
During the design process, I used the approaches of individual transport and pedestrian facilities to the plot. When analyzing pedestrian access, it became clear that the parcel can be taken from almost all directions, so the orientation of the terminal is not clearly predetermined. In connection with a diverse surrounding area that at present does not offer any attractive surrounding scene, I decided to turn the orientation towards the center to create a yard that will link individual transport sites, allow access from all corners of the parcel, and create a central area for visitors of terminal.
|
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Čánský, Pavel ; Odvárka, Antonín (referee) ; Marek, Jiří (advisor)
The aim of the thesis is to design a train and a bus terminal attached to the city centre by a new pedestrian area, which is separated from the industrial area by a housing development. Since the current access to the property is very poor, another aim of this project is to design a new access road. There are a number of aspects taken into account, i.e. the scale of the city and its surroundings, a current housing development such as Tesco store and a Christmas decoration factory. What is also considered is the dimensions of the nearby buildings, which determine the dimensions of the design project. The project promotes the emergence of an urban area with new facilities such as a concert hall, post office, police station, parks, stores, indoor swimming pool and gallery.
|
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Martinčeková, Jaroslava ; Šmídek, Petr (referee) ; Foretník, Jan (advisor)
The territory is located in Dvur Kralove nad Labem in the Czech Republic. The concept of the transfer terminal consists in creating a separate space, optically partially closed and partially open, which will be made of concrete frames. The frames, defining the station space, will be overgrown by greenery and, on the arrival of a visitor by train, they will create an impression of entering the green "yard". The frames are visually redecorated on the facade of the terminal itself, and the whole object thus acquires a unified and integral expression. The arrangement of the frames diffuses in the direction from the train entrance to the terminal building, and partially limits the views to the current unaesthetic buildings around the western part of the parcel. Gradual diffusing allows crossing of the railway section with greenery and provides views of the park around the terminal.
|
|
|
Diagnostic and improvement of electrical contact
Hrdý, Branislav ; Kuchyňková, Hana (referee) ; Veselka, František (advisor)
The aim of bachelor thesis is create a summary overview of terminals, to obtain information about contruction, materials of the conductive parts of the terminals and its snap methods. The next goal was description of methods of conductors’ construction and snap methods of its con-ductors. All processed information is obtained from the technical literature and from practical knowledge acquired during the measurement and monitoring of analyzed terminals. The final goal was to create an animated 3D model of terminal as a sample of main process of terminals’ working principle. In conclusion of this work is comparison of terminals, and their properties, facts observed during measurement or testing.
|
guest ::
